About PRECIMED

Power Magnetic Drill Presses High Speed 50mm Boring Depth for Bridge Engineering Steel Structure Wind Power 1100W 110V

Power Magnetic Drill Presses High Speed 50mm Boring Depth for Bridge Engineering Steel Structure Wind Power 1100W 110V - -. 【Z3040 Magnetic Drill Press】The Steel Dragon Tools Z3040 Magnetic Drill Press will accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 1-1/2 in. (40 mm). 。 【Powerful Electromagnet】This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet. The electromagnet has 2,700 lbs nof max force and ensures the machine will not move during the drilling process. 。 【Leverage】A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down. 。 【Application】Fit for steel structure, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power, drilling rig, power construction, railway manufacturing etc. 。 【Package Include】1 X Magnetic Drill. 。 Specification:。 Motor: High-Speed Series。 Max Magnetic Force: 2,700 Lbs(12,000 N)。 Maximum Boring Depth: 0mm。 Twist drill diameter:1.-13mm。 Opening range diameter:12-40mm。 Spindle Speed: 0 RPM。 Overall Weight: 14kg。 Rated voltage: 0V。 Rated frequency: 0H。 Rated input power: 00W。 Max.travel: 180mm。  。 Magnetic Drill:/ Rack and pinion gear system for exact drilling depth.。 Annular Cutter:。 SDT annular cutters will drill large holes up to ten times faster than regular drills bits.。 Machine-finish hole with no reaming needed when using lubricant.。 Make overlapping holes, slotting holes, and edge cuts. Bit size is etched on each cutter.。 Pilot pin helps locate center of hole location and helps eject slug after drilling is complete.。 During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.。  。 Magnetic drill maintenance:。 Which can be seen in the development of magnetic drill is precision required. We ordinary operators to understand his basic principles, But in this aspect of the magnetic drill repair the better is professional disassembly assembly or maintenance.On the one hand magnetic drill internal power generated high Voltage, non-professionals may get into life-threatening, the other aspect, th magnetic drilling precision is possible to be affected by non-professional assembly.  CAUTION: Make sure to turn off the switch and unplug the power cor, before checking and maintaining.。 Note:。 1, Magnetic drill should be stored in a dry, clean, no corrosive gases and where children can not touch.。 2, Save every part in the demolition of magnetic drill and when assembly it is good to put in the original parts.。 3, Magnetic drill parts should be often injected into the lubricating oil and keep clean.。 。

Power Magnetic Drill Presses High Speed 50mm Boring Depth for Bridge Engineering Steel Structure Wind Power 1100W 110V
Power Magnetic Drill Presses High Speed 50mm Boring Depth for Bridge Engineering Steel Structure Wind Power 1100W 110V
Power Magnetic Drill Presses High Speed 50mm Boring Depth for Bridge Engineering Steel Structure Wind Power 1100W 110V
Power Magnetic Drill Presses High Speed 50mm Boring Depth for Bridge Engineering Steel Structure Wind Power 1100W 110V
Power Magnetic Drill Presses High Speed 50mm Boring Depth for Bridge Engineering Steel Structure Wind Power 1100W 110V