About PRECIMED

AMIS-30543 Stepper Motor Driver Carrier

AMIS-30543 Stepper Motor Driver Carrier: Chicago Electronic Distributors. This is a breakout board for ON Semiconductor’s AMIS-3053 microstepping bipolar stepper motor driver, which features SPI-adjustable current limiting, 11 step modes (from full-step through 1/18-step), back-EMF feedback that can be used for stall detection or optional closed-loop control, and over-current and over-temperature protection. The board operates from 6 V to 30 V and can deliver up to approximately 1.8 A per phase without a heat sink or forced air flow (it is rated for 3 A per coil with sufficient additional cooling).。 This product is a carrier board or breakout board for ON Semiconductor’s AMIS-3053 Micro-Stepping Motor Driver; we therefore recommend careful reading of the AMIS-3053 datasheet (95k pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 3 A output current per coil (see the Power Dissipation Considerations section below for more information). 。 Note: This driver needs to be enabled and configured through its SPI interface on power up, so your microcontroller must be capable of acting as an SPI master (either with an SPI peripheral or software SPI). 。 。 。

AMIS-30543 Stepper Motor Driver Carrier
AMIS-30543 Stepper Motor Driver Carrier
AMIS-30543 Stepper Motor Driver Carrier
AMIS-30543 Stepper Motor Driver Carrier