About PRECIMED

Elimia DOL 1.6-2.5-480LCS 1 HP 480V Magnetic Motor Starter Nema Rated 4X UL508A

Elimia DOL 1.6-2.5-480LCS 1 HP 480V Magnetic Motor Starter Nema Rated 4X UL508A: Industrial & Scientific. Elimia DOL 1.6-2.5-480LCS 1 HP 480V Magnetic Motor Starter Nema Rated 4X UL508A: Industrial & Scientific. Made in USA 。 Pre-Wired 。 Nema 4X Rated Enclosure 。 UL 508A Listed 。 1HP 3 phase 480V 。 SIZED FOR 1HP 480V. DOL Magnetic Motor Starter. Works in all applications where a separate limit switch is NOT used to engage the starter. UL 508A Certified Every Motor Starter is built and tested to order in Alabama, USA. Our customer's come back time and time again, try one and you will see... Nothing else in this price range even comes close. We have updated our enclosed motor starters to make them better than ever. Now using Nema Rated LSis Motor Starter, made in Korea. Also, the Weg control switch is new, it uses A600 contact block with integral LED indicator. Please note that the label on the pictured unit may be from a different rated unit. Use the specifications below to verify for your application. This new magnetic motor starter is designed to run equipment where the user controls the starting and stopping. It uses momentary push buttons and a latch auxiliary contact on the starter to hold power until the stop button is pressed. This type of controls can not be used for equipment such as an air compressor. Pre-wired for easy installation. Model Number: DOL 1.6-2.5-480LCS Model Explanation: DOL = Across the line starter 1.6-2.5 Amp = Overload Size, 480 = Coil Voltage (suitable for 460V - 480V) LC = Low cost compact design Sized for 1 HP @ 480V 3 phase. Ratings of contactor used in this starter, do not exceed ratings: Size 12 Contactor, Nema Size 0, 3 phase- 1 HP @ 480 VAC You must use a control voltage 460 - 480 VAC for this unit, it is pre-wired to connect to your line connections on the starter. The control voltage is the voltage used to activate the coil of the contactor. In the simplest install you will want a coil voltage the same as your power supply. But is some cases you might want the control voltage to be different for a host of reasons. 。 。 。

Elimia DOL 1.6-2.5-480LCS 1 HP 480V Magnetic Motor Starter Nema Rated 4X UL508A
Elimia DOL 1.6-2.5-480LCS 1 HP 480V Magnetic Motor Starter Nema Rated 4X UL508A
Elimia DOL 1.6-2.5-480LCS 1 HP 480V Magnetic Motor Starter Nema Rated 4X UL508A
Elimia DOL 1.6-2.5-480LCS 1 HP 480V Magnetic Motor Starter Nema Rated 4X UL508A
Elimia DOL 1.6-2.5-480LCS 1 HP 480V Magnetic Motor Starter Nema Rated 4X UL508A